Moon Phases Wall Hanging Crochet Pattern
Easy to follow and fun to make, this Moon Phases Wall Hanging crochet pattern adds a touch of magic to any room. Filet crochet lace illuminates the moon phases on a solid background, creating an ethereal effect perfect for Halloween / Samhain, and beyond.
This content is protected by copyright. See this Terms of Use / Copyright page for more information.
This post contains sponsored content and/or affiliate links. If you click an affiliate link and make a purchase, I may get a commission.
CAL Central Halloween Crochet Along
This Moon Phases Wall Hanging is my design for the 2024 Halloween Crochet Along at CAL Central. Join in the fun on the Facebook Group. See the main post for the full schedule, other patterns, and giveaway information too!
Not Just for Halloween!
This Moon Phases Wall Hanging is a beautiful decoration for Samhain / Halloween, and also for the rest of the year! Display it on a wall or door, or use it as a table runner or altar cloth. Hang it in a window to cast lunar shadows as light filters through the filet crochet mesh.
Caron One Pound Yarn
Yarnspirations gave me the Caron One Pound Yarn to use for this project. I chose this yarn because it’s a sturdy, hard-wearing acrylic that’s still soft and enjoyable to work with. It will hold up to the repeated rounds of hanging, washing, and storing that this piece is likely to face.
Choosing Black (635) gave the greatest contrast against a white wall or door, but this design would look equally lovely in other colors. For a bit of color, try Deep Violet (547), Dark Grey Mix (618), or Midnight Blue (546).
Filet Crochet
The Basics
If you’re not familiar with Filet crochet, it’s a fun and easy technique to learn! It uses double crochet and chain spaces to create solid blocks and open mesh blocks. Learn the basics of filet crochet, including how to read the charts, in this filet crochet tutorial. For this pattern, I’ve made a few changes from the tutorial.
- The tutorial uses double crochet (dc), where this pattern uses extended double crochet (edc).
- Instead of a “beginning mesh”, the first edc of each row is worked separately.
- Working into each chain directly where applicable, rather than working into the chain spaces. This adds just a bit more structure to the design. If you prefer though, you can work into the chain spaces instead.
Advanced Stitches
The center (full moon) of this Moon Phases Wall Hanging design uses 2 advanced filet crochet stitches: the lacet stitch and the rectangle. Though these are considered advanced, they are no more difficult than the basic stitches.
The rectangle uses a chain-5 space to create a large open rectangle across 2 blocks. The lacet stitch also covers 2 blocks, but has a single crochet in the middle. Paired together, they create a wider, open space with a curvy shape to it.
Materials
- Yarn: 380 yds Caron One Pound – 100% acrylic, worsted-weight yarn (812 yds / 16oz / 454g per skein), shown in #635 Black
- Hook: Size I / 5.5 mm crochet hook or size needed to match gauge
- Notions:
- Scissors
- Tapestry Needle
Project Level
Easy: Filet crochet with lacet and rectangle stitches.
Sizes
15″ wide x 48″ tall not counting hanging loops
Gauge
13 edc x 5 rows = 4″, after blocking.
Note: The added height of the edc helps make each block/mesh more square. The width of 3 sts or chs should approximately equal the height of 1 row. If you find that your stitches are too tall, you can switch to regular dc instead.
Abbreviations used
This pattern uses US terms.
- ch = chain
- dc = double crochet
- edc = extended double crochet (see Special Stitches)
- RS = right side
- sc = single crochet
- sk = skip
- sl st = slip stitch
- sp = space
- st(s) = stitch(es)
- yo = yarn over
Recommended Resources
- How to Crochet Without a Slip Knot
- Basic Filet Crochet (see note below)
Note: The Basic Filet Crochet tutorial has some differences from this pattern, but is a great general foundation in the technique. That tutorial uses dc instead of edc. It also defines a “beginning mesh” which is a mesh with an extra dc. Here the starting edc is written separately. Finally, it shows working into chain spaces whereas this pattern works into each chain.
Special Stitches
Extended Double Crochet (edc)
Yo, insert hook in indicated st or ch, yo and pull up a loop, yo and pull through 1 lp on hook, [yo and pull through 2 loops on hook twice].
Mesh
Ch 2, sk next 2 sts/chs, edc in next st.
Block
Edc in each of next 3 sts/chs.
Note: When edc are worked into chs, you can work them into the ch-sp instead, if preferred. For example, you can work 2 edc in a ch-2 sp, instead of 1 edc in each of the 2 chs.
Lacet stitch (lacet)
Worked over 2 blocks/mesh.
Ch 2, sk next 2 sts/chs, sc in next st/ch, ch 2, sk next 2 sts/chs, edc in next st.
Rectangle (rect)
Worked over 2 blocks/mesh.
Ch 5, sk next 5 sts/chs, edc in next st.
Instructions
Section 1
Scroll down for chart.
Row 1 (RS): Ch 51, edc in 4th ch from hook (3 skipped chs count as first edc), edc in each rem ch across. (49 edc)
Row 2: Ch 3 (counts as first edc throughout), turn, block across. (1 edc, 16 blocks)
Rows 3 & 4: Ch 3, turn, 2 blocks, 1 mesh, 10 blocks, 1 mesh, 2 blocks. (1 edc, 14 blocks, 2 mesh)
Row 5: Ch 3, turn, 2 blocks, 2 mesh, 8 blocks, 2 mesh, 2 blocks. (1 edc, 12 blocks, 4 mesh)
Row 6: Ch 3, turn, 2 blocks, 3 mesh, 6 blocks, 3 mesh, 2 blocks. (1 edc, 10 blocks, 6 mesh)
Row 7: Ch 3, turn, 2 blocks, 4 mesh, 4 blocks, 4 mesh, 2 blocks. (1 edc, 8 blocks, 8 mesh)
Row 8: Ch 3, turn, 3 blocks, 10 mesh, 3 blocks. (1 edc, 6 blocks, 10 mesh)
Row 9: Ch 3, turn, 4 blocks, 8 mesh, 4 blocks. (1 edc, 8 blocks, 8 mesh)
Row 10: Ch 3, turn, 5 blocks, 6 mesh, 5 blocks. (1 edc, 10 blocks, 6 mesh)
Row 11: Ch 3, turn, block across. (1 edc, 16 blocks)
Sections 1 & 5 Chart
Note: The starting ch-3 (first edc) of each row is not shown separately on the chart. For all charts in this pattern, start each row with a ch-3, which counts as the first stitch.
This same chart is used for Rows 1-11 of Section 1, and Rows 50-59 of Section 5.
Section 2
Scroll down for chart.
Row 12: Ch 3, turn, block across. (1 edc, 16 blocks)
Row 13: Ch 3, turn, 3 blocks, 1 mesh, 8 blocks, 1 mesh, 3 blocks. (1 edc, 14 blocks, 2 mesh)
Row 14: Ch 3, turn, 2 blocks, 2 mesh, 8 blocks, 2 mesh, 2 blocks. (1 edc, 12 blocks, 4 mesh)
Row 15: Ch 3, turn, 2 blocks, 3 mesh, 6 blocks, 3 mesh, 2 blocks. (1 edc, 10 blocks, 6 mesh)
Row 16: Ch 3, turn, 2 blocks, 4 mesh, 4 blocks, 4 mesh, 2 blocks. (1 edc, 8 blocks, 8 mesh)
Rows 17-19: Ch 3, turn, 2 blocks, 12 mesh, 2 blocks. (1 edc, 4 blocks, 12 mesh)
Row 20: Ch 3, turn, 3 blocks, 10 mesh, 3 blocks. (1 edc, 6 blocks, 10 mesh)
Row 21: Ch 3, turn, 4 blocks, 8 mesh, 4 blocks. (1 edc, 8 blocks, 8 mesh)
Row 22: Ch 3, turn, 5 blocks, 6 mesh, 5 blocks. (1 edc, 10 blocks, 6 mesh)
Row 23: Ch 3, turn, block across. (1 edc, 16 blocks)
Sections 2 & 4 Chart
This same chart is used for Rows 12-23 of Section 2, and Rows 38-49 of Section 4.
Section 3
Scroll down for chart.
Row 24: Ch 3, turn, block across. (1 edc, 16 blocks)
Row 25: Ch 3, turn, 5 blocks, 6 mesh, 5 blocks. (1 edc, 10 blocks, 6 mesh)
Row 26: Ch 3, turn, 4 blocks, 1 mesh, 3 lacet, 1 mesh, 4 blocks. (1 edc, 8 blocks, 2 mesh, 3 lacet)
Row 27: Ch 3, turn, 3 blocks, 2 mesh, 3 rect, 2 mesh, 3 blocks. (1 edc, 6 blocks, 4 mesh, 3 rect)
Row 28: Ch 3, turn, 2 blocks, 2 mesh, 4 lacet, 2 mesh, 2 blocks. (1 edc, 4 blocks, 4 mesh, 4 lacet)
Row 29: Ch 3, turn, 2 blocks, 2 mesh, 4 rect, 2 mesh, 2 blocks. (1 edc, 4 blocks, 4 mesh, 4 rect)
Row 30: Ch 3, turn, 2 blocks, 1 mesh, 5 lacet, 1 mesh, 2 blocks. (1 edc, 4 blocks, 2 mesh, 5 lacet)
Row 31: Ch 3, turn, 2 blocks, 1 mesh, 5 rect, 1 mesh, 2 blocks. (1 edc, 4 blocks, 2 mesh, 5 rect)
Rows 32 & 33: Repeat Rows 28 & 29.
Row 34: Ch 3, turn, 3 blocks, 2 mesh, 3 lacet, 2 mesh, 3 blocks. (1 edc, 6 blocks, 4 mesh, 3 lacet)
Row 35: Ch 3, turn, 4 blocks, 1 mesh, 3 rect, 1 mesh, 4 blocks. (1 edc, 8 blocks, 2 mesh, 3 rect)
Row 36: Repeat Row 25.
Row 37: Ch 3, turn, block across. (1 edc, 16 blocks)
Section 3 Chart
Section 4:
See Section 2 for chart.
Rows 38-49: In reverse order, repeat rows 23-12 of Section 2.
Section 5:
See Section 1 chart above and Row 60 chart below.
Rows 50-59: In reverse order, repeat rows 11-2 of Section 1.
Row 60: Ch 10, turn, sl st in 8th ch from hook (counts as first dc and ch-7 loop), [edc in next 6 sts, ch 7, sl st in edc just made] across. (49 edc, 9 ch-7 hanging loops)—
Row 60 Chart:
Finishing
Weave in ends.
Wash and block. Blocking is important in this pattern, to open up the lace.
Share this Moon Phases Wall Hanging crochet pattern on Pinterest!
Here’s an image perfect for pinning.
Rate this Moon Phases Wall Hanging crochet pattern!
I hope you enjoyed this Moon Phases Wall Hanging crochet pattern! A downloadable pdf of this pattern, formatted for easy printing, is available on Ravelry for a small fee.
Do you want the best of Stitches n Scraps delivered right to your inbox? Don’t miss a stitch – Subscribe now!
4 Comments
Sharon
I absolutely LOVE this!!! Thank you xx
Pia Thadani
Yay! Have fun with it
Kelly Stamper
Hi! I want to let you know that your link to Ravelry goes to a hat! Which I already have!
Kelly
Pia Thadani
Oh no! Thanks for letting me know, I have fixed it. The correct link to Ravelry is https://www.ravelry.com/patterns/library/moon-phases-wall-hanging